Danfoss VLT Series Programming Manual page 169

Parameter Description
23-65 Minimum Bin Value
Range:
Size [
related 100. %]
*
3 3
23-66 Reset Continuous Bin Data
Option:
[0] Do not reset Select Do reset [1] to reset all values in
*
[1] Do reset
23-67 Reset Timed Bin Data
Option:
[0] Do not reset
[1] Do reset
168
VLT
Function:
0 - Array with 10 elements ([0]-[9] below
parameter number in display). Press OK and
step between elements by means of
▼
buttons on the LCP.
Set the minimum limit for each interval in
23-61 Continuous Bin Data and 23-62 Timed
Bin Data. Example: if selecting counter [1]
and changing setting from 10% to 12%,
counter [0] will be based on the interval 0 -
<12% and counter [1] on interval 12% -
<20%.
Function:
23-61 Continuous Bin Data.
After pressing OK the setting of the
parameter value will automatically change to
Do not reset [0].
Function:
Select Do reset [1] to reset all counters in
23-62 Timed Bin Data.
After pressing OK the setting of the parameter
value will automatically change to Do not reset
[0].
MG.11.CC.02 - VLT
®
HVAC Drive Programming Guide
▲
and
®
is a registered Danfoss trademark