Danfoss VLT Series Programming Manual page 159

Parameter Description
22-89 Flow at Design Point
Range:
0.000 [0.000 -
*
999999.999 ]
3 3
Please also see 22-82 Work Point Calculation point C.
22-90 Flow at Rated Speed
Range:
0.000 [0.000 -
*
999999.999 ]
158
®
VLT HVAC Drive Programming Guide
Function:
Enter the value corresponding to
the Flow at Design Point. No
units necessary.
Function:
Enter the value corresponding to
Flow at Rated Speed. This value
can be defined using the pump
datasheet.
®
MG.11.CC.02 - VLT is a registered Danfoss trademark