Danfoss VLT Series Programming Manual page 171

Parameter Description
23-82 Investment
Range:
0 [0 - 999999999 ] Set the value of the investment spent on
*
3 3
23-83 Energy Savings
Range:
0 kWh [0 - 0
*
kWh]
23-84 Cost Savings
Range:
0 [0 - 2147483647 ] This parameter allows a readout of the
*
170
®
VLT HVAC Drive Programming Guide
Function:
upgrading the plant with speed control,
in same currency as used in 23-81 Energy
Cost.
Function:
This parameter allows a readout of the
accumulated difference between the
reference power and the actual output
power.
If motor size set in hp (1-21 Motor Power
[HP]), the equivalent kW value will be used
for the Energy Savings.
Function:
calculation based on the above equation
(in local currency).
MG.11.CC.02 - VLT
®
is a registered Danfoss trademark