Manual Start/Stop Operation; Emergency Start Up - Smartgen HGM4100LT User Manual

4.4

MANUAL START/STOP OPERATION

, and the controller shall enter "Manual mode". The manual mode indicator is on. Then
1) Press
press and start the genset. It can automatically judge whether crank disconnection is
successful and it can accelerate to high speed running automatically. It can effectively protect and
stop if high water temperature, low oil pressure, over speed, abnormal voltage etc. circumstances
occur in the diesel genset running process (for details please refer to the auto start process 4~8).
When genset high-speed running goes normal, press
key Gen breaker close can be controlled; and by
At this time the generator is working with loading.
2) Manual stop: press
to No.3~7 of Auto stop sequence).
4.5

EMERGENCY START UP

Under manual mode, simultaneously press
forcibly. At this time, the controller shall not judge whether the genset has started by crank
disconnection conditions. The starter disconnection is controlled by the operator. When the operator
observes the genset has started, let go of the buttons and start output is stopped. The controller
enters safe running delay.
HGM4100LT Genset Controller
HGM4100LT GENSET CONTROLLER USER MANUAL
key and it can stop the running genset (for detail procedures please refer
2019-01-28
and it comes the C/O interface. By
Gen breaker open can be controlled.
and , and the genset can be started
Version1.0 Page 11 of 48