Overview; Performance And Characteristics - Smartgen HGM4100LT User Manual

1

OVERVIEW

HGM4100LT Power Station Automatic Controller is designed especially for adapting
extremely low/high temperature (-40~+70)℃, which integrates digitization, intelligentization and
network technology, and are used for single genset automation and monitoring control system, in
order to achieve automatic start/stop, data measurement, alarm protection etc. functions. It applies
LCD display, optional interface operation with eight languages (Chinese, English, Spanish, Russian,
Turkish, French, Portugal, and Polish). It is simple to operate and reliable to work.
HGM4100LT Power Station Automatic Controller employs micro-processor technology,
which makes these functions come true, including precise parameter measuring, fixed value
adjustment, time setting and integer limit value adjusting etc. All parameters can be configured from
the front panel. They can also be adjusted and monitored through programmable interfaces (USB or
RS485 interface) via PC. Because of the characteristics of compact structure, simple wiring
connection and high reliability, it can be widely used in all types of automatic genset control system.
2

PERFORMANCE AND CHARACTERISTICS

HGM4100LT: it is used for single unit automation and genset auto Start/Stop control by remote
start signals.
Main characteristics:
 LCD display with backlight, 132x64 size, and eight language display (Chinese, English,
Spanish, Russian, Turkish, French, Portugal, and Polish), push-button operation;
 Hard acrylic screen material with great wear-resisting and scratch-resisting performance,
which are used to protect the screen;

Silicone panel and pushbuttons which can better adapt extreme temperature
environment;
 RS485 communication interface, which enables "Three remote functions" (remote
control, remote measuring and remote communication) by MODBUS protocol;

CANBUS port, which can connect with J1939-equipped electronic injection engine.
Not only can it monitor frequently-used data (such as water temperature, oil pressure, speed,
fuel consumption and so on) of ECU machine, but also control start-up, shutdown , speed
raising and speed dropping etc. (the controller with CANBUS interface is needed);

Suitable for 3-phase 4-wire, 3-phase 3-wire, single phase 2-wire, and 2-phase 3-wire
systems with voltage 120/240V and frequency 50/60Hz;

Collecting and displaying 3-phase voltage, 3-phase current, frequency, and power
parameters;
Generator
Line voltage (Uab, Ubc, Uca)
Phase voltage (Ua, Ub, Uc)
Phase sequence
Load
Current Ia,
Each phase and total active power P
Reactive power Q
Apparent power S
Power factor PF
Accumulated total generator power
HGM4100LT Genset Controller
HGM4100LT GENSET CONTROLLER USER MANUAL
Ib, Ic
W
2019-01-28
A (unit)
kW (unit)
kvar (unit)
kVA (unit)
kWh, kVarh, kVAh (unit)
Version1.0 Page 5 of 48