Wiring Connection - Smartgen HGM4100LT User Manual

6

WIRING CONNECTION

HGM4100LT controller back panel is as bellows:
No. Function
1 B-
2 B+
3 Fuel relay output
4 Start relay output
5 Charger(D+)
6 COM ground-connected port 1.5 mm
7 Aux. Output 1
8 Aux. Output 2
HGM4100LT Genset Controller
HGM4100LT GENSET CONTROLLER USER MANUAL
Fig.3 HGM4100LT Back Panel
Table 6 Terminal Wiring Connection
Cable
Size
2
2.5mm Connected with negative of starter battery;
Connected with positive of starter battery; If wire
2
2.5mm length is over 30m, it is better to double wires in
parallel; Max. 20A fuse is recommended.
B+ output is supplied by terminal 2 with rated 5A; It
2
is "programmable relay output 5" in parameter
1.5mm
setting.
2
1.5mm B+ output is supplied by terminal 2 with rated 5A.
Connected with charger starter's terminal D+ (WL);
2
1.0mm
Let it hang up if there is not the terminal in charger.
2
Internally connected with B-;
B+ output is supplied by
2
1.0mm
terminal 2 with rated 1A.
B+ output is supplied by
2
1.0mm
terminal 2 with rated 1A.
2019-01-28
Remarks
For setting items
please
Table 8.
Version1.0 Page 18 of 48
refer to