Specification Operation - Smartgen HGM4100LT User Manual

3

SPECIFICATION OPERATION

Items
Operating Voltage
Power Consumption
AC Gen Voltage Input:
3Phase 4Wire
3Phase 3Wire
Single Phase 2Wire
2Phase 3Wire
AC Gen Frequency
Speed Sensor Voltage
Speed Sensor Frequency
Start Relay Output
Fuel Relay Output
Programmable Relay Output 1
Programmable Relay Output 2
Programmable Relay Output 3
Programmable Relay Output 4
Case Dimension
Panel Cutout
CT Secondary Current
Working Conditions
Storage Condition
Protection Level
Insulation Intensity
Net Weight
HGM4100LT Genset Controller
HGM4100LT GENSET CONTROLLER USER MANUAL
Table 2 Technical Parameters
DC8.0V to DC35.0V, Continuous Power Supply.
<3W (standby ≤2W)
15V AC - 360 V AC (ph-N)
30V AC - 620 V AC (ph-ph)
15V AC - 360 V AC (ph-N)
15V AC - 360 V AC (ph-N)
50 Hz/60 Hz
1.0V to 24.0V (RMS)
10,000 Hz (max.)
5 A DC28V power supply output
5 A DC28V power supply output
1 A DC28V power supply output
1 A DC28V power supply output
1A DC28V power supply output
1A DC28V power supply output
135mm x 110mm x 44mm
116mm x 90mm
5A rated
Temperature: (-25~+70)° C; Relative Humidity: (20~93)%RH
Temperature: (-25~+70)° C
IP65: rubber seal installed between the controller enclosure and
panel screen.
Apply AC2.2kV voltage between high voltage terminal and low
voltage terminal and the leakage current is not more than 3mA
within 1min.
0.32kg
2019-01-28
Contents
Version1.0 Page 7 of 48