Connection Of Controller And Engine With J1939; Cummins Isb/Isbe; Cummins Qsl9 - Smartgen HGM4100LT User Manual

13 CONNECTIONS OF CONTROLLER WITH ENGINE J1939

13.1 CUMMINS ISB/ISBE

Terminals of controller
Programmable output port 1
Start relay output
Programmable output port 2
Terminals of controller
CAN_SCR
CAN(H)
CAN(L)
Engine type: Cummins ISB.

13.2 CUMMINS QSL9

It is suitable for CM850 engine control mode.
Terminals of controller
Programmable output port 1 39
Start relay output
Terminals of controller
CAN_SCR
CAN(H)
CAN(L)
Engine type: Cummins-CM850.
HGM4100LT Genset Controller
HGM4100LT GENSET CONTROLLER USER MANUAL
Table13 Connector B
Connector B
39
-
Expand 30A relay,
providing battery
voltage for terminal 01,
07, 12, 13;
Table 14 9 Pins Connector
9 pins connector
SAE J1939 shield
SAE J1939 signal
SAE J1939 return
Table 15 50 Pins Connector
50 pins connector
-
Table 16 9 Pins Connector
9 pins connector
SAE J1939 shield-E
SAE J1939 signal-C
SAE J1939 return-D
2019-01-28
Remark
Set configurable output 1 as "Fuel Relay
Output";
Connected with starter coil directly;
ECU power;
Set configurable output 2 as "ECU power";
Remark
CAN communication
(connected to ECU terminal only);
Using impedance 120Ω connecting line;
Using impedance 120Ω connecting line;
Remark
Set configurable output 1 as "Fuel Relay
Output";
Connected to starter coil directly;
Remark
CAN communication
(connected to ECU terminal only);
Using impedance 120Ω connecting line;
Using impedance 120Ω connecting line;
Version1.0
shielding line
shielding line
Page 40 of 48