13.3 CUMMINS QSM11 (import)
It is suitable for CM570 engine control mode. Engine type is QSM11 G1, QSM11 G2.
Terminals of controller
Programmable output1
Start relay output
Terminals of controller
CAN_SCR
CAN(H)
CAN(L)
Engine type: Cummins ISB.
13.4 CUMMINS QSX15-CM570
It is suitable for CM570 engine control module. Engine type is QSX15.
Terminals of controller
Programmable output1
Start relay output
Terminals of controller
CAN_SCR
CAN(H)
CAN(L)
Engine type: Cummins QSX15-CM570.
HGM4100LT Genset Controller
HGM4100LT GENSET CONTROLLER USER MANUAL
Table 17 C1 Connector
C1 connector
5&8
-
Table 18 3 Pins Data Link Connector
3 pins data link
connector
C
A
B
Table 19 50 Pins Connector
50 pins connector
38
-
Table 20 9 Pins Connector
9 pins connector
SAE J1939 shield-E
SAE J1939 signal-C
SAE J1939 return-D
2019-01-28
Remark
Set configurable output 1 as "Fuel Relay
Output"; Outside expand relay; when fuel
relay outputs, make port 5 and port 8 of C1
be connected;
Connected to starter coil directly;
Remark
CAN
communication
(connected to ECU terminal only);
Using impedance 120Ω connecting line;
Using impedance 120Ω connecting line;
Remark
Oil spout switch; Set configurable output 1
as "Fuel Relay Output";
Connected to starter coil directly;
Remark
CAN
communication
(connected to ECU terminal only);
Using impedance 120Ω connecting line;
Using impedance 120Ω connecting line;
Version1.0
shielding
line
shielding
line
Page 41 of 48