Smartgen HGM4100LT User Manual page 6

Output percentage with loading

Overvoltage, undervoltage, overfrequency, underfrequency, overcurrent, overpower
functions for generating;

Precisely collecting all kinds of parameters for the generator:
Temp.
Oil Pressure
Fuel Level
Speed
Voltage of Battery
Voltage of Charger
Hour count accumulation
Start times accumulation

Control and protection function: automatic start/stop of the diesel genset, ATS (Auto
Transfer Switch) control and perfect fault indication and protection functions;

ETS (energize to stop), idling speed control, pre-heating control and speed rise/drop
control functions, which are all relay outputs;

Parameter setting function: it allows users to change and set parameters and
meanwhile they shall be stored in the internal FLASH. They shall not be lost even in case of
power outage; All of them can be adjusted from the front panel of the controller and also can be
modified on PC via USB or RS485 port;

Two multiplex input port 4 and 5; Input port 4 can be configured as switch input port or
fuel level sensor; input port 5 can be set as switch input port or programmable sensor. It can be
flexibly applied on different occasions.

Multiple temperature, pressure, oil level sensors can be used directly and their
parameters can be self-defined;

One programmable sensor; it can be configured as temperature, pressure or liquid
level sensor, which achieves the detection for double temperature, double pressure or double
liquid level;

Optional crank disconnection conditions (speed sensor, oil pressure, generating);

Emergency start function;

Automatic recognition function for flywheel tooth number;

Wide power supply range (8~35)VDC, which is suitable for different starting battery
voltage environment;

All parameters apply digital adjustment, getting rid of conventional analog modulation
of normal potentiometer, improving the reliability and stability of the whole device;

Maintenance function; maintenance types can choose date or running time,
maintenance actions can be configurable (reactive, warning, or alarm shutdown);

Event log, real-time clock, and scheduled start & stop function (start once each
day/week/month and loading or not can be set); Maximum event logs are 99 items;

Rubber seal designed between the shell and the screen with protection level IP65;

Metal fixing clips are used to fix the controller;

Modular structure design, anti-flaming ABS plastic enclosure, pluggable connection
terminals and embedded installation way with compact structure and easy mounting.
HGM4100LT Genset Controller
HGM4100LT GENSET CONTROLLER USER MANUAL
%
° C/° F
kPa/psi/bar all be displayed
%(unit) Fuel Quantity Left L(unit)
r/min (RPM)
V (unit)
V (unit)
2019-01-28 Version1.0 Page 6 of 48