Table of Contents
Advertisement
Enter "generator at rest" as soon as "after stop time" is over. If genset fail to stop, controller will
6)
initiate alarms (fail to stop warning shown on LCD).
4.5 MANUAL START/STOP OPERATION
1)
HGM8140: Manual mode is selected by pressing the
illuminate to confirm the operation; press
judge crank success and accelerate to high speed running. If high temperature, low oil pressure,
over speed and abnormal voltage occur during genset running, controller can effectively protect
genset to stop (detail procedures please refer to No.5~8 of Auto start sequence). After genset is
normal running, press
2)
Manual stop: pressing
No.4~6of Auto stop sequence)
4.6 EMERGENCY START UP
Simultaneously press
Successful start will not be judged according to crank disconnect conditions, operator will have to
crank the starter motor manually; when operator decides that the engine has fired, he/she should
release the button or disconnect manual force to start input and start output will be deactivated, safety
on delay will be initiated.
HGM8140 Military Genset Controller
HGM8140 MILITARY GENSET CONTROLLER USER MANUAL
button to start the genset, it can automatically
button, and genset on load
key can stop the running genset. (detail procedures please refer to
and
or in manual mode will force generator to crank.
Version 1.2
button; a LED besides the button will
2019-09-12
Page 12 of 56
Advertisement
Table of Contents
