Figure 13: Front View of MX10008
1
MX 100 08
4
5
4
1
Routing and Control boards
—
2
Status panel
—
3
Handles
—
WARNING:
of the chassis on the mounting brackets. Do not use the handles to lift the chassis, even
when the chassis is empty. See
Mechanical Lift" on page 143
page 147
for instructions for properly moving a loaded chassis.
SEE ALSO
MX10008 Rack Requirements | 96
MX10008 Components and Configurations | 31
2
4
4
The handles on each side of the chassis facilitate the fine-tune positioning
"Mounting an MX10008 in a 4-Post Rack Using a
or
"Manually Mounting an MX10008 in a 4-Post Rack" on
3
4
Mounting holes for front panel
—
5
Line cards
—
37