Juniper MX10008 Hardware Manual page 211

Figure 109: Installing a JNP10K-PWR-AC2 in an MX10016
11. Attach each power cable to a dedicated power (A and B). The JNP10K-PWR-AC2 only requires that
each power supply be connected to a separate source. See
cabling combinations for MX10008 and
Figure 110: Proper Load Balancing for JNP10K-PWR-AC2 Power Cables on MX10008
OR
Figure 110 on page 213
Figure 111 on page 214
for some possible
for MX10016.
213