Juniper MX10008 Hardware Manual page 180

Figure 77: Removing Fan Tray JNP10008-FAN2 from an MX10008
4. Tilt the top of the fan tray forward.
CAUTION:
surfaces including the power supply handles may be hot. Wear proper protective,
heat-resistant gloves while removing the fan tray.
5. Using both hands, lift the fan tray out of the slot and rest it on a flat surface with the handles to the
side.
CAUTION:
page 179.
See the heat symbol
Fan trays must be replaced within the duration mentioned in
on the fan tray. The fan handle and its
182
Table 56 on