Juniper MX10008 Hardware Manual page 252

Figure 150: Installing an MX10008 SFB
7. Tighten the captive screws by using your thumb and forefinger.
8. Install the appropriate fan tray (see
9. Set the fans to normal speed by using the test chassis fan tray speed 0 normal and test chassis fan
tray speed 1 normal command.
10. Bring the SFB online by using the request chassis sib slot slot number online command. You can check
the status of the SFB by using the show chassis sfb and the show chassis fabric plane-location
commands.
root> show chassis sfb
Slot State
0 Online
1 Online
2 Online
3 Online
4 Empty
5 Empty
"Installing an MX10008 Fan Tray" on page
Uptime
1 day, 17 hours, 7 minutes, 53 seconds
1 day, 17 hours, 7 minutes, 35 seconds
1 day, 17 hours, 7 minutes, 18 seconds
1 day, 17 hours, 7 minutes
183).
254