Juniper MX10008 Hardware Manual page 226

NOTE: Ensure that the ejector is fully open to avoid scratching the chassis.
YES
Ejector fully open
19. Route INP1 cables to a power source and INP2 to another power source. The JNP10K-PWR-DC shares
power, so if power dips on one input, the power supply is able to load balance internally. See
Figure 124 on page 228
Figure 124: Proper Load Balancing for JNP10K-PWR-DC Power Cables on MX10008
NO
Ejector closed
and Figure 125 on page
Scratches
229.
228