Ensure you understand how to prevent ESD damage. See
on page
343.
Ensure that you have the following parts and tools available to remove a JNP10K-PWR-AC power supply
from an MX10008 router:
Electrostatic discharge (ESD) grounding strap
Phillips (+) screwdriver, number 1
Replacement power supply or a cover panel for the power supply slot
CAUTION:
operational. Either replace the power supply promptly or install a cover panel over the
empty slot.
To remove a JNP10K-PWR-AC power supply from an MX10008 router::
Do not leave the power supply slot empty for a long time while the router is
"Prevention of Electrostatic Discharge Damage"
192