Mx10000 Power System - Juniper MX10008 Hardware Manual

Table 12: Fan Tray Controller LEDs on an MX10008 Router (continued)
Name
Fan tray controller status
SEE ALSO
MX10008 Cooling System and Airflow | 45
Installing an MX10008 Fan Tray | 183
Removing an MX10008 Fan Tray | 179
Installing an MX10008 Fan Tray Controller | 188
Removing an MX10008 Fan Tray Controller | 186

MX10000 Power System

IN THIS SECTION
JNP10K-PWR-AC Power Supply | 61
JNP10K-PWR-AC2 Power Supply | 63
JNP10K-PWR-DC Power Supply | 65
JNP10K-PWR-DC2 Power Supply | 68
Color State
Green On steadily
Green Blinking
Yellow Blinking
None Off
Description
The fan tray controller is online and is
operating normally.
The beacon feature is enabled. This feature
is enabled using the request chassis
beacon command.
An error has been detected in the fan tray
controller. Replace the fan tray controller
as soon as possible. To maintain proper
airflow through the chassis, leave the fan
tray installed in the chassis until you are
ready to replace the fan tray controller.
The fan tray controller is not receiving
power.
59