Juniper MX10008 Hardware Manual page 108

Table 39: AC Power Cord Specifications for MX10008 Routers (continued)
Electrical
Country/Region Specifications
Switzerland 250 VAC, 16 A,
50 Hz
United Kingdom 250 VAC, 13 A,
50 Hz
CAUTION:
only. Do not use the cord for another product.
Power Cable Warning (Japanese)
WARNING: The attached power cable is only for this product. Do not use the cable for another product.
CAUTION:
that you route all AC power cord cables through the power cord tray provided with the
router.
WARNING:
protective earthing terminal on the chassis that must be permanently connected to earth
ground to adequately ground the chassis and protect the operator from electrical hazards.
Plug Standards
SEV 5934/2 Type
23G
BS 1363/A Type
BS89/13
AC power cords for MX10008 routers are intended for use with these routers
Power cords must not block access to router components. We recommend
The router is installed in a restricted-access location. It has a separate
Juniper Model
Number Graphic
CBL-EX-PWR-C19-SZ
CBL-EX-PWR-C19-UK
109