Juniper MX10008 Hardware Manual page 31

Table 4: MX10008 Hardware Configurations (continued)
Router Configuration
Redundant DC configuration
MX10008-PREMIUM
NOTE: You can install up to eight line cards in the router.
NOTE: Line cards and the cable management system are not part of the base or redundant
configurations. You must order them separately.
NOTE: If you want to purchase additional power supplies (AC, DC, HVAC, or HVDC), SFBs, or
RCBs for your router configuration, you must order them separately.
SEE ALSO
MX10008 Cooling System and Airflow | 45
MX10008 Routing and Control Board Description | 77
JNP10K-PWR-AC Power Supply | 61
JNP10K-PWR-DC Power Supply | 65
MX10008 Switch Fabric Board Description | 84
Configuration Components
Chassis, including power bus
Two Routing and Control Boards
Two fan tray controllers (JNP10008-FAN-CTRL or JNP10008-FTC2)
Two fan trays (JNP10008-FAN and JNP10008-FAN2)
Six DC power supplies (JNP10K-PWR-DC, JNP10K-PWR-DC2, or
JNP10K-PWR-AC2)
Six SFBs
Eight line card covers
32