Ensure you understand how to prevent ESD damage. See
on page
343.
If the AC power source outlets have a power switch, set them to the off (O) position.
Ensure that you have the following parts and tools available to install an AC power supply:
Electrostatic discharge (ESD) grounding strap
Phillips (+) screwdriver, number 1
Power cords appropriate for your geographical location. See
on page
107.
Power cord retainer clips
To install a JNP10K-PWR-AC power supply in an MX10008 or an MX10016:
"Prevention of Electrostatic Discharge Damage"
"MX10000 Power Cables Specifications"
197