Juniper MX10008 Hardware Manual page 147

Ensure that you have the following parts and tools available to install the router:
14 mounting screws appropriate for your rack
A Phillips (+) screwdriver, number 2 or number 3, depending on the size of your rack-mounting screws
To install the router in the rack or cabinet (see
CAUTION:
one at the bottom of the rack. Do not attempt to install a router manually in an upper
position in a rack or cabinet.
1. Ensure that the rack or cabinet is placed in its permanent location and is secured to the building.
2. Align the router in front of the rack or cabinet, centering it in front of the adjustable mounting brackets.
Use a pallet jack if one is available.
3. With one person on each side and one person in the rear, hold the bottom of the chassis and carefully
lift it onto the adjustable base and rear brackets installed in a four-post rack. See
WARNING:
your back. Do not twist your body as you lift. Balance the load evenly and be sure
that your footing is firm.
Figure 55 on page
If you are installing more than one router in a rack or cabinet, install the first
To prevent injury, keep your back straight and lift with your legs, not
150):
Figure 54 on page
148
149.