Juniper MX10008 Hardware Manual page 22

Chassis Description
MX10008 is 13 U tall. Up to three MX10008 routers can fit in a standard 39 U rack with adequate cooling
and power. All key MX10008 router components are field-replaceable units (FRUs).
illustrates the key components visible from the front of the chassis.
Figure 1: MX10008 Chassis Front
1
MX 100 08
4
5
4
1 Routing and Control Boards
—
2 Status LED panel
—
3 Handles
—
Some chassis ship with an enhanced power bus to support the power needs of higher wattage line cards.
Chassis with the enhanced power bus have a modified Status Panel (see
on page 39).
Figure 2 on page 24 illustrates the components that are visible from the rear of the chassis.
2 3
4
4
4 Installation holes for the front panel
—
5 Line card slots 0-7 (numbered top to bottom)
—
Figure 1 on page 23
"MX10008 Status Panel LEDs"
23