Spectrum Display - Horizon Fitness HD-STM User Manual

Satellite Spectrum Display
Freq. 11818 MHz: V(13) 22kHz
Press ◄ or ► alter centre frequency
Press ▲ or ▼ to adjust amplitude.
01/10/2010 10:30 AM
From the satellite mode you can select the Spectrum Display by pressing the Spect soft key indicated on the
right hand side of the display and you will be presented with a spectrum display similar to that shown above.
For simplicity the carrier used for identification will be the centre frequency (as indicated by the vertical centre
line on the spectrum display). You can adjust the centre frequency by using the left or right cursor keys and
the frequency information is displayed underneath the spectrum. You can also adjust the amplitude with the
up an down cursor keys so that carriers and noise floor can be seen easily.
Note: You can return to the satellite finding mode at any time by pressing the Sat soft key.
Freq. 11818 MHz: V(13) 22kHz
Press ◄ or ► alter centre frequency
Press ▲ or ▼ to adjust amplitude.
01/10/2010 10:30 AM
The guide text at the bottom of the display here is showing you how to return to Sat Finding mode or go
back to the Spectrum display.
Data capture
Save screen shot and
measurement data to
SD card.
File name: SS00001.bmp
Press OK to save to SD card.
01/10/2010 10:30 AM
Page 12
Pressing SAT will return you to the
Sat
Satellite Finding mode.
Pressing Custom takes you to the Custom
Custom
Carrier Mode (covered later).
Pressing Span cycles through the available
Span
spans of 60, 120, 240, 480, 960 and 1200MHz
240MHz
Pressing More will show you the additional
More
functions available from the Spectrum mode.
Pressing SAT will return you to the
Sat
Satellite Finding Mode
Pressing Save to SD Card will enable you to grab a screen
Save to
shot of the spectrum display saving it as a .bmp (bit map) file.
SD Card
Pressing Back will return you to the
Back
previous spectrum options (as above).
If you choose to save the spectrum display to the
Main
SD card the whole screen is captured as a .bmp
Menu
file. Once the image has been saved you will be
returned to the spectrum display.
Satellite spectrum data capture is stored
as incremental files prefixed SS and then
the file number. The image is also time
and date stamped.
Back