File Transfer - Horizon Fitness HD-STM User Manual

File Transfer

Now that you have downloaded your desired files we are ready to transfer them to your HD-STM meter.
Ensure that you have already installed the drivers for your meter on your computer before proceeding.
Connect your HD-STM meter via the USB lead supplied to your computer.
Note: if the required drivers have not been
installed then these errors could occur.
Unzip and double click the target icon of the HD-STM
loading program that you downloaded previously from
the Horizon web site.
Select Meter and then Search to check which com port
is being used, this will put the meter into program mode.
Click OK on the pop-up showing the com port in use.
Click "Transfer" to send the data to your meter.
On clicking Transfer the meter display will
change to "Program mode".
Click "OK" once the transfer is complete, close the
program and disconnect your meter.
Troubleshooting:
Should a "Meter found but can't open serial port
error occur please disconnect the USB lead and
start the loading procedure from the beginning.
Page 37