Leuze electronic CML 720i Ex Operating Instructions Manual page 78

Parameter
Automatic splitting
Evaluation of the beams
in the area
Number of areas (evenly
split)
Configuration for block evaluation of beam areas (group 14)
In this group, a detailed area configuration can be displayed and a beam area configured for the
block evaluation.
Parameter
Display detailed area
configuration
Configuration of area 1
Configuration of area 01
Area
Active beam
Start beam of the area
End beam of the area
Leuze electronic
Index Sub- Data type Access Value range
index
98 0 unsigned 1 RW
6
98 1 unsigned 8 RW
(bit
offset
= 8)
98 2 unsigned 8 RW
(bit
offset
= 0)
Index Sub- Data type
index
99 0 unsigned 8
100 0 record
112 bit, iso-
lated access
to sub-index
not possible
100 1 unsigned 8
(bit
offset
= 104)
100 2 unsigned 8
(bit
offset
= 96)
100 3 unsigned 8
(bit
offset
= 80)
100 4 unsigned 8
(bit
offset
= 64)
Starting up the device - IO-Link interface
Default Explanation
1 ... 32 1:
1: (active: all
(active
beams free - not : all
active: = one beams
beam inter- free -
rupted) not
active:
257 ... 288 = one
2: (active: one beam
beam free - not
inter-
active: = all rupted)
beams inter-
rupted)
0 ... 1 0
1 ... 32 1
Access Value range Default Explanation
RW 0 ... 32 0
RW
RW 0 ... 1 0
RW 0 ... 1 0
RW 1 ... 1774 1
65534
65533
65532
65531
RW 1 ... 1774 1
65534
65533
65532
65531
CML 720i Ex
Splitting of all logical beams into areas of identical
size according to the number of areas set under
"Number of areas". The fields of areas 01 ... 32 are
thereby automatically configured.
1: (active: all beams free –
not active: ≥ one beam interrupted)
1: One area
...
32: Thirty-two areas
2: (active: one beam free –
not active: = all beams interrupted)
257: One area
...
288: Thirty-two areas
0: OR combination
1: AND combination
Select the desired area (1 ... 32) for which the con-
figuration is to be edited in detail.
0: Area 01
1: Area 02
2: Area 03
...
31: Area 32
Configuration of the area: definition of the status
conditions so that the area takes on a logical
1 or 0. For diagonal- or crossed-beam scanning,
the numbers of the logical beams are to be
entered.
0: Not active
1: Active
0: Light switching (beam is active if light path is
free)
1: Dark switching (beam is active if light path is
interrupted)
65534: First interrupted beam (FIB)
65533: First not interrupted beam (FNIB)
65532: Last interrupted beam (LIB)
65531: Last not interrupted beam (LNIB)
65534: First interrupted beam (FIB)
65533: First not interrupted beam (FNIB)
65532: Last interrupted beam (LIB)
65531: Last not interrupted beam (LNIB)
78