Tolerance band assignment 1 2 3 The assignment of the tolerance band is only displayed in teach-in mode. Tol. Leuze electronic GmbH + Co. KG In der Braike 1 D-73277 Owen Tel. +49 (0) 7021 573-0 CRT448… - 02 info@leuze.com • www.leuze.com...
Page 4
LED of the corresponding output channel is illuminated. If an object is not reliably detected, select the next-highest tolerance level. By repeating this process, the optimal tolerance level can be determined. CRT448… - 02 2013/01...
Press SET BUTTON (for 3s) >> green LED illuminates. The sensor is ready in the new operating mode. Leuze electronic GmbH + Co. KG In der Braike 1 D-73277 Owen Tel. +49 (0) 7021 573-0 CRT448… - 02 info@leuze.com • www.leuze.com...