Beam-Stream - Leuze electronic CML 720i Ex Operating Instructions Manual

1
a
a
b
The counting direction can be changed via the respective fieldbus interface (see chapter 9 et
seq.) or via the
4.3

Beam-stream

The single-beam evaluation (beam-stream) returns the status of each individual beam (see figure 4.4).
Uninterrupted beams (free beams) are represented as logical 1 in the output bit in this case.
The data is available via the respective fieldbus interface (see chapter 9 et seq.) or via the
Sensor Studio
For an example configuration, see chapter 11.1.
16
1
1
Figure 4.4: Example: beam-stream evaluation
4.4 Evaluation functions
The states of the individual optical beams (free/interrupted) can be evaluated in the CML 700i and the
result read out via various evaluation functions.
The most important evaluation functions are shown in the following figure:
Leuze electronic
b
Receiver connection unit
Optical part
Sensor Studio
configuration software (see chapter 12).
configuration software (see chapter 12).
Beam-stream
... n n ...
b
1
1 1 1 1 1 0 0 0 0 1
CML 720i Ex
Functions
1
a
1 1 1 1 1 1
26