Leuze electronic CML 720i Ex Operating Instructions Manual page 113

Figure 12.3: Device selection for CML 700i measuring light curtain
 Select the connected light curtain according to the configuration in the device selection and click on
[Next].
In the device description in the device selection list, the values for the bit rate and PD length configura-
tion parameters for the respective light curtain are listed. Factory settings on delivery:
Bit rate: COM2
PD length: 2 bytes
The device manager (DTM) of the connected light curtain starts with the offline view for the
configuration project.
 Establish the online connection to the connected light curtain.
Sensor Studio
In the
Sensor Studio
In the
The IO-Link USB master synchronizes with the connected light curtain and the current configuration data
and process data are displayed in the device manager (DTM).
Leuze electronic
FDT frame, click on the [Establish connection with device] button (
FDT frame, click on the [Online parameters] button (
CML 720i Ex
Connecting to a PC – Sensor Studio
Sensor Studio
).
).
113