Leuze electronic CML 720i Ex Operating Instructions Manual page 75

Digital IO pin N settings (N = 2, 5, 6, 7) (group 10)
In this group, the inputs/outputs can be set to positive switching (PNP) or to negative switching
(NPN). The switching behavior applies the same for all inputs/outputs.
Moreover, the inputs/outputs can be configured via this group: pin 2, 5, 6, 7 for IO-Link devices,
pin 2, 5 for analog or fieldbus devices.
Parameter
Switching level of the
inputs/outputs
Configuration of pin 2
Digital IO Pin 2 Settings
Input/output selection
Switching behavior
Input function
Output function
Configuration of pin 7
Digital IO Pin 7 Settings
Input/output selection
Switching behavior
Input function
Output function
Settings for digital switching outputs (group 11)
In this group, the beam areas can be mapped to the switching outputs and assigned a time func-
tion.
Leuze electronic
Index Sub- Data type
index
77 0 unsigned 8
80 0 record 32 bit,
isolated
access to
sub-index not
possible
80 1 unsigned 8
(bit
offset
= 24)
80 2 unsigned 8
(bit
offset
= 16)
80 3 unsigned 8
(bit
offset
= 8)
80 4 unsigned 8
(bit
offset
= 0)
83 0 record 32 bit,
isolated
access to
sub-index not
possible
83 1 unsigned 8
(bit
offset
= 24)
83 2 unsigned 8
(bit
offset
= 16)
83 3 unsigned 8
(bit
offset
= 8)
83 4 unsigned 8
(bit
offset
= 0)
Starting up the device - IO-Link interface
Access Value range Default Explanation
RW 0 ... 1 1
RW
RW 0 ... 1 0
RW 0 ... 1 0
RW 0 ... 2 0
RW 0 ... 3 0
RW
RW 0 ... 1 0
RW 0 ... 1 0
RW 0 ... 2 0
RW 0 ... 3 0
CML 720i Ex
0: Transistor, NPN
1: Transistor, PNP
0: Output
1: Input
0: Normal - light switching
1: Inverted - dark switching
0: Not active
1: Trigger input
2: Teach input
0: Not active
1: Switching output (area 1 ... 32)
2: Warning output
3: Trigger output
0: Output
1: Input
0: Normal - light switching
1: Inverted - dark switching
0: Not active
1: Trigger input
2: Teach input
0: Not active
1: Switching output (area 1 ... 32)
2: Warning output
3: Trigger output
75