Display On The Receiver Control Panel - Leuze electronic CML 720i Ex Operating Instructions Manual

Table 3.1:
LED Color
1 Green
2 Yellow
3.4.2

Display on the receiver control panel

Located on the receiver is an OLED display which serves as a function indicator.
Figure 3.3: OLED display on the receiver
The type of display on the OLED display is different for the following operating modes:
• Alignment mode
• Process mode
Display indicators in alignment mode
In alignment mode, the OLED display shows the received signal level of the first active logical beam (FB)
and of the last active logical beam (LB) via two bar graph indicators.
1
1
2
3
Figure 3.4: OLED display on the receiver in alignment mode
Display indicators in process mode
In process mode, the upper line shows the number of interrupted beams (TIB) and the lower line shows
the logic state of the digital outputs. The value to be displayed is configurable.
Leuze electronic
Meaning of the LEDs on the receiver
State Description
ON (continuous Light curtain ready (normal mode)
light)
Flashing see chapter 13.2
OFF Sensor not ready
ON (continuous All active beams are free - with function reserve
light)
Flashing see chapter 13.2
OFF At least one beam interrupted (object detected)
Evenly aligned light curtain
No reception signal from first beam (FB); good reception signal from last beam (LB)
Marker for the minimum signal level which is to be achieved
3
2
CML 720i Ex
Device description
15