Leuze electronic CML 720i Ex Operating Instructions Manual page 116

If parameters are changed in the device manager (DTM) that affect other parameters (e.g., if
changing the beam mode causes the configured logical beams to change), the changes to these
parameters are configured in the device – but are not yet displayed in the
Click on the [Synchronize with device] button (
the current configuration of the light curtain. Following successful synchronization, the [Upload
device data set from device] button (
PROCESS
12.4.4 function
Process
• The
tain.
Figure 12.5: Graphical visualization: object position
• [Cyclical refresh] button (
cally depicted under
display covers up to 300 seconds.
Beam-stream display
•
graphical cursor in the visualization, e.g., to evaluate the time difference between two events.
Leuze electronic
function offers graphical visualizations of the process data of the connected light cur-
): Starts the cyclical acquisition of the process data, which are graphi-
Numerical display
: Using the [Show or hide the graphical cursor] button (
) to synchronize the
) is displayed in the device manager (DTM).
Beam-stream display
, and Areas and outputs. Each graphical
CML 720i Ex
Connecting to a PC – Sensor Studio
Sensor Studio
Sensor Studio
), you can move the
display.
display with
116