Leuze electronic CML 720i Ex Operating Instructions Manual page 114

Figure 12.4: Configuration project:
 The menus of the
uration of the connected light curtain.
The user interface of the
The online help system provides information on the menu items and adjustment parameters. Select the
Help menu item in the menu [?].
Error message when [establishing connection with the device]
If the device selected in the Device selection list of the
configuration (bit rate and PD length) of the connected light curtain, an error message is displayed.
Under IDENTIFICATION > CxL-7XX Device IDs, you will find a list with the assignment of the device IDs
displayed in the error message to the device description in the device selection list.
 Change the device selection in the device selection list according to the configuration (bit rate and PD
length) of the connected light curtain.
Alternatively, you can set the configuration (bit rate and PD-length) of the light curtain in the receiver
control panel corresponding to the device selection in the Device selection list.
Sensor Studio
 In the
12.4 Short description of the
This chapter contains information and explanations on the individual menu items and adjustment param-
Sensor Studio
eters of the
light curtains.
Leuze electronic
Sensor Studio
Sensor Studio
device manager (DTM) can be used to change or read out the config-
Sensor Studio
device manager (DTM) is largely self-explanatory.
FDT frame, click on the [Establish connection with device] button (
Sensor Studio
configuration software
configuration software and the device manager (DTM) for CML 700i measuring
device manager (DTM) for CML 700i
Sensor Studio
CML 720i Ex
Connecting to a PC – Sensor Studio
Project Wizard does not match the
).
114