Resetting The User Counters Of The Controller On-Time And The Robot Running Time - Denso VS-G Series Installation & Maintenance Manual

STEP 2
3.8.2 Resetting the User Counters of the Controller ON-Time and the
Robot Running Time
STEP 1
The Total hours window appears as shown below.
[Total operation] Shows the grand total of the robot controller ON-time
counted after the controller leaves the factory.
[Total running] Shows the grand total of the robot running time counted
after the robot leaves the factory.
[Cumu. operation] Shows the total of the robot controller ON-time counted after
you reset the user counter to zero.
[Cumu. running] Shows the total of the robot running time counted after you
reset the user counter to zero.
[Operation] Shows the ON-time of the robot controller counted after it is
turned ON this time.
[Running] Shows the running time of the robot counted after the robot
controller is turned ON this time.
Display the Total hours window as shown below.
Access: [F6 Set]—[F6 Maint.]— [F1 Total h] from the top screen
To reset the user counter of the controller ON-time (Cumu.operation), for
example, press [F4 Cumu. o].
F4
92