Denso VS-G Series Installation & Maintenance Manual page 114

STEP 3
STEP 4
Select arm data.
(1) Press the Details button to call up the window below.
(2) Press the Browse button in Arm Manager to call up the Open Project
window.
Select desired file in the floppy disk, then press the Open button.
(3) The screen will return to the Details window where you press OK button.
Create a project.
On the Create New Project window, press OK button. Now, a project to
be transferred has been created.
[Details window]
[Selecting a file]
96
Browse button
File "Vm-6083d.arm"
in drive A is selected.