Mounting The Calset Jig - Denso VS-G Series Installation & Maintenance Manual

2.4.4

Mounting the CALSET Jig

To CALSET the 6th axis on all models or the 4th axis on models having no mechanical
stop, you need to mount the CALSET jig on the axis beforehand according to the
procedure given in (1) below or (2) given later, respectively.
To CALSET all axes including the above axes, follow those procedures (1) and (2).
(1) Mounting the CALSET jig on the 6th axis
STEP 1
STEP 2
Fit a stopper pin in the CALSET jig.
Release the brake of the 6th axis.
63