Denso VS-G Series Installation & Maintenance Manual page 103

STEP 8
STEP 9
Remove the last old battery and connect the dummy connector cap
disconnected in Step 4.
Old backup battery
Install the cover to the robot unit.
Cover
Cross pan-head
screw
Standard type
Tightening torque:
Cross pan-head screw: 0.59 Nm (Standard type)
Hex. socket-head bolt: 2.0 Nm (Dust-proof, splash-proof type)
Dummy connector cap
Cover
Hex.
socket-head
bolt
85
Dust-proof & splash-proof type
Cover