Denso VS-G Series Installation & Maintenance Manual page 63

(2) Items to be Prepared by the Customer for 3rd-axis Mechanical End Change
Shown below are the items to be prepared by the customer for 3rd-axis mechanical
end change.
To be prepared
by the customer
3rd-axis mechanical stop
Washer
Bolts
(3) 3rd-axis Mechanical End Positions
The 3rd-axis mechanical end positions available are shown in the VS-G Series
INSTALLATION & MAINTENANCE GUIDE. The 3rd-axis motion range defined in it
applies as is. Specify the software motion limit that corresponds to the mechanical stop
end position actually selected, referring to the above manual.
Items for 3rd-axis Mechanical End Change
Reference Drawings (Specifications)
Material: A2017
Material: A2017
• Four hex. socket-head bolts M5x30 (Strength class: 12.9) for securing a
mechanical stop
• One hex. socket-head bolt M5x10 (Strength class: 12.9) as a mechanical
stop bolt
45
(Unit: mm)
(Unit: mm)