Resetting The User Counters Of The Controller On-Time And The Robot Running Time - Denso VP-G SERIES Installation & Maintenance Manual

3.8.2 Resetting the User Counters of the Controller ON-Time and the
Robot Running Time
STEP 1
STEP 2
Display the Total hours window as shown below.
Access: [F6 Set]—[F6 Maint.]— [F1 Total h] from the top screen
To reset the user counter of the controller ON-time (Cumu.operation), for
example, press [F4 Cumu. o].
The following system message appears.
Press the OK button.
40
F4