Setting The Operation At Error [Error Setting] - Omron FH Series User Manual

4 Setting the Controller
4-18 Setting the Operation at Error [Error
Setting]
Normally, when an error occurs, an error signal is output to the communication module in use and
measurement is stopped. Using this function, you can select whether to output an error signal or show
a dialog when a specific error occurs for each line.
1
In the Main Window, select System settings - Other - Error Setting from the Tool menu.
2
Valid error type selections and current settings are displayed.
Additional Information
For error messages and troubleshooting, refer to 11-1 Error Messages and Troubleshooting on
page 11 - 2.
3
Select Error Type to set the error operation on the error select window.
4
Set the error operation on the Error Setting area.
Item
Error Type
ERROR Signal
Output
4 - 60
Set value
[Factory default]
- Displays the Error No, and Error Type selected on the Error
select window.
•
[ON] Select the Radio button to output the error signal when se-
• lected Error Type occurs.
OFF
Description
FH/FHV Series Vision System User's Manual (Z365-E1)