Omron FH Series User Manual page 187

Edit Flow Tab Screen
In this screen, you can add processing items to the flow, rearrange or delete the added processing
units, change the settings, assign variables to parameters, and perform test measurements on the
edited flow.
c. Menu Bar
d. Scene tab
e. Unit list (flow)
f. Size slider
(a) Edit item tab area:
Clicking a tab switches screens among Edit flow, Scene variable, and System variable.
(b) Edit flow button area:
Rearrange or delete processing units in the scene.
The items are the same as the shortcut menu items of [Edit flow] in the Menu bar and the items
displayed when the right mouse button is clicked on the unit list (flow).
For more details, refer to 5-5-3 Editing Scenes [TDM Editor] on page 5 - 33.
Icon
FH/FHV Series Vision System User's Manual (Z365-E1)
a. Edit item tab area
b. Edit flow button area
Function
Displays items of Edit flow in the Menu bar with a shortcut
Menu
menu format.
New Folder Creates a folder at the position selected on the Unit list (Flow).
Inserts a loaded processing unit at the position selected on the
Load Unit unit list (Flow). The selection of the unit to be loaded is per-
formed with the displayed FileExplorer.
Saves a processing unit at the position selected on the Unit list
Save Unit (Flow). The setting for Save Destination and Name is per-
formed with the displayed FileExplorer.
Variable assign-
Displays the Variable assignment list dialog.
ment list
Checks whether undefined variables are assigned. If there
Variable check
were undefined variables, a warning dialog will be displayed.
5 Creating Measurement Scenes
g. Unit added tab
h. Unit area
Description
5
5 - 15