Omron FH Series User Manual page 223

The Initial value set form dialog box is displayed. The following example is that the number of
one-dimensional elements is 2 and the number of two-dimensional elements is 5.
One-dimensional
element index
The matrix is displayed according to the number of elements in one-dimensional and twodi-
mensional. The matrix may not fit into the dialog box size depending on the number of ele-
ments. In that case, drag the bottom-right corner of the dialog box to adjust the dialog box size.
2
Click a value cell on the matrix to directly enter the initial value for the array element.
When an array element is not displayed in the dialog, drag the scroll bar to find the array ele-
ment.
3
Click OK to end the input.
l Three- or more dimension Array Type Variables:
1
Click ... at the right of the Initial column for the selected variable.
The Initial value set form dialog box is displayed. The matrix may not fit into the dialog box
size depending on the number of elements. In that case, drag the bottom-right corner of the
dialog box to adjust the dialog box size. In the title bar, the variable type is also displayed. The
following example is that the number of one-dimensional elements is 2, the number of two-di-
mensional elements is 3, and the number of three-dimensional elements is 5.
FH/FHV Series Vision System User's Manual (Z365-E1)
5 Creating Measurement Scenes
Two-dimensional
element index
Value cell
5
5 - 51