Omron FH Series User Manual page 565

rectangle
histgram
• Return value:
If the density is acquired successfully, returns 0.
Otherwise, returns value other than 0.
l Getting the Specified Image Logging Information
• GetImageLogInfo
• Parameters:
kind
• Return value:
Returns the specified image logging information.
l Getting an I/O Module Identifier Name
• GetIoModuleIdent
• Parameters:
ioModuleNo
• Return value:
If the I/O module identifier name is acquired successfully (character string), returns 0.
Otherwise, returns value other than 0.
l Getting Security Related Parameters
• GetSecurityParameter
• Parameters:
_userName
FH/FHV Series Vision System User's Manual (Z365-E1)
Target rectangular area. The maximum size to acquire density is 4096 pixels.
Keep the size to no more than 4096.
Histogram array Resized when functions are executed.
Type of image logging information to acquire:
•
ImageLogMaxCount: Maximum number of images that can be logged in con-
troller memory
•
ImageLogCount: Count of logging images held in the controller memory
I/O module number
0: Registers ParallelIo (Parallel I/O). (Fixed)
1: Registers any of the following I/O modules in the module communication sys-
tem.
•
SerialNormal: Serial non-procedure communication
•
SerialNormal2: Serial non-procedure communication (Fxxx series method)
•
SerialPlcLink: Serial PLC link (Omron PLC)
•
SerialPlcLinkM: Serial PLC link (Mitsubishi PLC)
2: Registers any of the following I/O modules for Ethernet communication sys-
tem.
•
TcpNormal: TCP non-procedure communication
•
UdpNormal: UDP non-procedure communication
•
UdpNormal2: UDP non-procedure communication (Fxxx series method)
•
UdpPlcLink: UDP PLC link (Omron PLC)
•
UdpPlcLinkM: UDP PLC link (Mitsubishi PLC)
•
TcpPlcLink: TCP PLC link (Omron PLC)
•
TcpPlcLinkM: TCP PLC link (Mitsubishi PLC)
3: Registers one of the following I/O modules or no registration.
•
EtherCAT: EtherCAT communication
•
EtherNetIP: EtherNet/IP communication
User name executed
Appendices
A
A - 45