Omron FH Series User Manual page 113

Setting Item
Relocate memo-
ries
*1. For FH series/FHV series, Relocate memories setting is invalid.
*2. Relocate processing could be take time depends on relocated data capacity or data fragmentation
when Relocate is selected.
*3. An error may occur; e.g. data is insufficient because data relocate processing is not carried out
when Do not relocate is selected. For data memory region, refer to A-9 About Memories Usable with
FH series/FHV series on page A - 29.
FH/FHV Series Vision System User's Manual (Z365-E1)
Set value
[Factory default]
•
[Relocate]
Select the relocate processing.
•
Do not relocate
•
Relocate: Relocate processing is executed. More units can
be registered to one Scene group because this function
improves the memory efficiency.
- At startup.
- When the Scene group is selected.
- When the Processing Unit is added.
- When Scene or Processing Unit is copied.
- When scene data, such as registered, or re-registered
Model, or Measurement region is changed.
It is normally recommended to use Relocate
•
Do not relocate: Relocate processing is not carried out.
Set this setting when Relocate processing takes long time.
*3
4 Setting the Controller
Description
*1
*2
4
4 - 5