Omron FH Series User Manual page 443

Name
OS
Memory
Free capacity in hard disk
Display
Network
To use the remote operation tool, Microsoft .NET Framework 3.5 must be installed.
Precautions for Correct Use
In the remote operation, the following port numbers are used to communication with the Sensor
Controller.
• 9900 + Line number (e.g. port 9900 for line 0)
• 9910 + Line number (e.g. port 9910 for line 0)
• 9920 + Line number (e.g. port 9920 for line 0)
Line Numbers: FH: 0 to 7, FHV: 0 to 1
If these ports are disabled due to security settings of your PC or the domain security policy, the
remote operation is not available.
Reconsider the security settings of your PC or the domain security policy, or ask your domain
security administrator.
Setting Network
Perform the network settings on the Sensor Controller and the remote operation PC respectively.
If the network address part of an IP address for the Sensor Controller is different from that for the re-
mote operation PC, the connection for the remote operation is not available.
Additional Information
With the remote operation PC, the network settings for the Sensor Controller is possible.
For details, refer to Network Settings for Sensor Controller (With Remote Operation PC) on
page 10 - 7.
For FHV series, follow the above procedures to set the network for the Sensor Controller.
l Network Settings for Remote Operation PC
Set the IP address for the remote operation PC.
1
Open the Local Area Connection Properties on the remote operation PC.
FH/FHV Series Vision System User's Manual (Z365-E1)
Windows 7 Professional (32/64bit)
or
Enterprise (32/64bit)
or
Ultimate (32/64bit)
Windows 10 Pro (32/64bit)
or
Enterprise (32/64bit)
2 GB (3 GB or more recommended)
2 GB or more
Resolution: 1,280 x 1,024 dots or higher
Display color: True Color (32 bits)
10BASE-T compatible network (100BASE-TX recommended)
10 Advanced Usage
Description
10
10 - 5