Troubleshooting - Omron FH Series User Manual

9 Saving/Loading Data
9-7-4

Troubleshooting

This section explains possible error messages that may be displayed while using Configuration Copy,
as well as possible solutions.
l Errors that may occur when loading.
During the loading of a sensor controller's project, the following error message is displayed.
Example: Loading of settings data file failed.
• To continue the loading of the Sensor Controller's project
Click Continue button.
Loading of the sensor controller will continue, however, the settings data that caused the error
message to display will not be applied.
• To cancel the loading of the sensor controller's project
Click Interrupt button.
Loading of the sensor controller will stop. After stopping, you can refer to the troubleshooting list
to find the possible cause and solution for the problem.
After that, initialize the sensor controller, and then reload the sensor controller's project.
A list of some common errors that may occur when using the Configuration Copy tool.
An error message occurred be-
cause the Sensor Controller's
project cannot be saved.
9 - 30
Problem
Save destination is not set.
Name of the Sensor Controller's
project is not entered.
An empty capacity of the external
storage is insufficient.
Cause
Set the save destination.
Enter the Sensor Controller
project name.
•
Change to an external storage
device with larger memory ca-
pacity.
•
Delete the unnecessary files.
FH/FHV Series Vision System User's Manual (Z365-E1)
Action