Setting Communication [Startup Settings] - Omron FH Series User Manual

4 Setting the Controller
4-3
Setting Communication [Startup Set-
tings]
Select the type of Communications Module to determine the communications method to use for com-
munications between the Sensor Controller and external device.
Refer to the Vision System FH/FHV Series User's Manual for Communications Settings (Cat. No.
Z342) for details on how to select the Communications Module.
Item
Serial (Ethernet)
Serial
(RS-232C/
RS-422)
Parallel
Fieldbus
Remote Opera-
tion
4 - 6
Set value
[Factory default]
•
[Normal (UDP)]
•
Normal (TCP)
•
Normal (TCP Client)
•
Normal (UDP) (Fxxx series
method)
•
PLC Link (SYSMAC CS/CJ/CP/
One)
•
PLC Link (MELSEC QnU/Q/
QnAS)
•
PLC Link (JEPMC MP)
•
[Normal]
•
Normal (Fxxx series method)
•
PLC Link (SYSMAC CS/CJ/CP/
One)
•
PLC Link (MELSEC QnU/Q/
QnAS)
•
Touch Panel Monitor (FHMT12)
[Standard Parallel I/O]
•
[OFF]
•
EtherCAT
•
EtherNet/IP
•
[ON]
•
OFF
Description
Specify the Communications Module.
•
Serial/Ethernet
Normal/Normal(Fxxx series method): Communica-
tions are performed with external devices through
non-procedure communications. For differences be-
tween Normal and Normal(Fxxx series method), re-
fer to the following note.
PLC Link: Communications are performed through
link areas with the PLC.
Touch Panel Monitor (FH-MT12): Communicate with
Touch Panel Monitor (FH-MT12). FH-MT12 is sup-
ported only by the FH series Sensor Controller.
•
Parallel
Standard Parallel I/O: Communications are per-
formed with a standard parallel interface.
Fieldbus: Communications are performed through
EtherCAT communications and the EtherNet/IP in-
terface.
Remote operation: The Controller is operated from
an external device.
FH/FHV Series Vision System User's Manual (Z365-E1)