Omron FH Series User Manual page 253

Item
Switch saving fold-
er by judge.
• Save to Memory + File Setting Example and Save Destination:
•
Folder name: USB disk
•
Prefix: image_
•
Switch saving folder by scene.: Selected
•
Switch saving folder by judge.: Selected
• Save to Memory + FTP Server Setting Example and Save Destination:
•
IP address: 10.5.6.100
•
User name: OMRON
•
Password: abc
•
Port number.: 21
•
Connection method: Active
•
Folder name: Logging
•
Prefix: image_
•
Switch saving folder by scene.: Selected
•
Switch saving folder by judge.: Not selected
Additional Information
• If logging errors occur, please check the following.
• Is the LAN cable connected properly?
• Are the destination server settings in system settings correctly set?
• Did you use any character other than single-byte alphanumeric characters for the file
names or folder names?
• Did you use the following symbols as the file or folder names?
¥ / : , ; * ? " < > |
• Measurement ID:
measurement time YYYY-MM-DD_HH-MM-SS-XXXX
(YYYY: Calendar, MM: Month, DD: Day, HH: Hour, MM: Minute, SS: Second, XXXX: Millisec-
ond and Line number)
Example:
Measurement time: 11:10:25.500 AM, December 24, 2007 and Line 0, the measurement ID is
"2007-12-24_11-10-25-5000".
Since the file name of the logging image also includes the same measurement ID, confirma-
tion of the measurement data and image data can be performed with the measurement ID.
7
Select the file type.
Set the file type to save image files. Refer to A-6 Image file on page A - 21.
FH/FHV Series Vision System User's Manual (Z365-E1)
6 Performing Measurement and Adjustment
Set value
[Factory default]
•
Checked If this is checked, OK/NG folders are automatically created
• and image files are divided by the overall judgment and
[Unchecked]
saved.
Setting example
Setting example
Description
Destination
The settings in the example on the left are ap-
plied as shown below.
•
OK image save destination:
\USBDisk\S000-000\OK\image_(Measurement
ID).IFZt
•
NG image save destination:
\USBDisk\S000-002\NG\image_(Measurement
ID).IFZ
Destination
With left sample settings, the file will be saved as
below.
•
When the current directory which FTP server
specifies is C:\Data\RAMDisk.
C:\Data\RamDisk\Logging\S000-000\im-
age_(Measurement ID.ifz)
6
6 - 13