Backing Up Sensor Controller Settings - Omron FH Series User Manual

Type
The common setting
data for the Sensor
Controller
Registered image
for the Sensor Con-
troller
*1. The setting data of Image Container Windows is included the layout information.
*2. FH/FHV serie: The target data is available when External storage device is indicated in External storage de-
vice settings.
*3. In Configuration Copy, you can register the selection status of configuration data as a Sensor controller's
project template.
*4. FH/FHV series: The destination folder of the Registered image is E:\RegisteredImage.
Additional Information
• When saving the system settings or scene group data individually, please refer to following.
For details, refer to 9-3 Saving Setting Data to the Controller RAMDisk or an External Storage
Device on page 9 - 8.
• When loading the system settings or scene group data individually, please refer to following.
For details, refer to 9-6 Loading Settings Data from the Controller RAMDisk or an External
Storage Device to the Sensor Controller on page 9 - 13.
9-7-2

Backing up Sensor Controller Settings

It's necessary to select the setting data of Sensor Controller and save the data to the External Storage
Device to back up the data.
This chapter explains the procedures for launching the Configuration Copy function, selecting the set-
tings data to save and selecting an External Storage Device for the save destination.
Precautions for Correct Use
Before starting up Configuration Copy, click the Data save button. Only the data saved to the
Controller can be backed up.
• For Multi-line random trigger mode, first, click Data save button at each lines. For each line,
start up Configuration Copy.
• After loading a BKD file (System setting + Scene group 0 data), do not save the data. Launch
the Configuration copy function after restarting Sensor Controller without saving.
• After loading the change of system setting or INI file (system set data), save to the Sensor
Controller. restart the Sensor Controller, and then launch the Configuration copy function. For
details, refer to 9-7 Backing up Sensor Controller Setting Data [Configuration Copy] on page
9 - 15.
Launching Configuration Copy
Necessary steps prior to launching Configuration Copy are explained here.
1
Connect the external storage device to the Sensor Controller.
2
From the Tool menu in the main window, select Configuration Copy.
FH/FHV Series Vision System User's Manual (Z365-E1)
Name
Sensor controller The target template is the template that is stored by Configuration
Copy.
*3
project template ( )
Refer to Editing a Template on page 9 - 22.
Registered image The target image data is the image data that is stored in the Reg-
istered Image Manager. (
Refer to 6-6 Managing Images used for Model Registration and
Reference [Registered Image Manager] on page 6 - 38.
9 Saving/Loading Data
Description
*4
)
9
9 - 17