*5.
Depending on the number of camera port of Sensor Controller.
*6.
Enable only STEP 0 to 2.
*7.
Enable only STEP 0.
*8.
Enable only DSA 0 to 2.
*9.
Enable only DSA 0.
*10. Disable to set. RS-422 is not supported.
*11. Supported only the Sensor Controller with 2 ports: FH-££££-10, FH-££££-20
FH/FHV Series Vision System User's Manual (Z365-E1)
1 Overview
1
1 - 5